features low forward volage drop high current capability high reliability high surge current capability mechanical case: ofc heat sink encap:epoxy sealed rated ul94v-0 weight: 7.05gram p black n brown dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 unless otherwise specified. single phase,half wave,60hz,resistive or inductive load . for capacitive load,deraate current by 20% maximum peak repetitive reverse voltage @irrm=100ma v maximum rms voltage v maximum dc blocking voltage t a =25 v peak forward surage current 8.3ms single half sine-wave superimposed on rated load (jedec method) a maximum inst. forward voltage drop, i f at 100amp v operating temperature range storage temperature range rev. 7, 16-mar-2017 -40to+175 -40to+175 glass passivated auto rectifiers pd5018p(n) 50 600 1.05 150 characteristics maximum average forward current i o @t c =150 60h z ,resistive or inductive load maximum dc reverse current (vb)@t j =25 at rated dc bolcking voltage (vb)@tj=175 28 20 28 v b i (av) 20 10 pd5018p(n) thru pd5030p(n) 24-32 34-45 ring color 5020 5030 v rrm marking a ua reverse voltage -19 to 45volts forward current -50 amperes unit pd5020p(n) pd5030p(n) symbol v rms t j t stg 5018 19-24 16 16 i fsm v f i r press-fit .500(12.70) .506(12.85) .409(10.4) .417(10.6) .193(4.9) .201(5.1) .360(9.0) .370(9.4) 1.063(27.0) 1.181(30.0) .042(10.7) .044(11.1) .049(1.25) .053(1.35)
the cruve graph is for reference only, can't be the basis for judgment( ?)! rev. 7, 16-mar-2017 rating and characteristic curves pd5018p(n) thru pd5030p(n) fig.1-forward current derating curve average forward rectified current , amperes case temperature, 50 100 0 150 10 50 40 30 20 60 80 70 200 250 0 60hz resistive or inductive load fig.2-maximum non-retetitive peak forward surge current number of cycles at 60h z peak forward surge current amperes 500 400 0 100 10 1 300 200 100 600 pulse width 8.3ms single half-wave (jedec method) fig.3 -typical instantaneous forward characteristics in s tantan c e o u s f o rward c urrent, amperes instantaneous forward voltagevolts 1000 1 1.4 1.2 1.0 0.8 0.6 0.4 0.2 100 10 1.6 t j =25 pulse width=300s 1%duty cycle fig.4-typical reverse characteristics percent of rated peak reverse voltage, % instantanceous reverse current, micramperes 1000 0.01 0 20 40 60 80 100 0.1 1 10 100 t j =25 t j =175
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
